初中效率袋型过滤器(过滤袋,袋式过滤器,无纺布过滤袋)

产品特性

·采用超细合成纤维以特殊织法制成,避免旧式玻璃纤维材料所可能对人体造成的不适

·滤材内含静电纤维,对次微米(大小1ū或小于1micron)粉尘过滤效率特别良好,具有高捕尘率,高粉尘载量及高透气性.高使用寿命.

·每个滤袋间以金属条固定,增加滤网强度,防止滤袋于高风速时,因风力之摩擦力而破裂，滤袋均有六道内衬,防止滤袋随风压过度膨胀,相互遮蔽而降低有效过滤面积与效率，滤袋边均采用热熔方式，具有良好的气密性及结合强度，不产生漏气或破裂。

·容尘量大、高效率、低压损。

·耐温达80℃

·镀锌框(可选外框厚度:20mm.25mm)

·铝金框(可选外框厚度:20mm.25mm)

用途

空调过滤系统中级过滤，精密无尘室Clear Room之二级过滤

高效过滤器的前道过滤

性能参数

Specification:

注：可根据客户要求定做其它规格尺寸。

Pocket middle efficiency filter

Speciality:

It is woven specially with the superfine fibre, in order to avoid the harmfulness to the people’s health because of the old style fibreglass;

Filter material content static electricity  fibre. It filtrate the submicron bug dust (size: 1ū or is smaller than 1micron)efficiently; It also have the good performance of the dust catching ,large dust holding capacity, high permeability and long working life.

In order to increase the intensity of the mesh ,every two filter bags are fixed by the metal bar. It will prevent the bags from bursting because of the friction force of the wind ,in the high wind speed. The filter bag has six inside linings in order to prevent the filter bag from expanding overly because of the wind pressure, because if the filter bags are sheltered from each other ,it will reduce the the effective filtration area and the filtration efficiency. The edge of the filter bag is made in hot melt way, so it has good gas tightness and the bonding strength, and it does not have the steam leakage or the breakage

The large dust holding capacity, the high efficiency, the low damaged due to pressing;

Temperature resistance up to 80℃

The galvanization frame (the outer edge thickness: 20mm and 25mm are  all available)

The aluminum alloy frame (the outer edge thickness: 20mm and 25mm are all available)

Using

Middle filtration for the air-condition, second-level filtration for the precise dust-free room,

Pre-filtration for the high efficiency filter

Remark: